Electronic Spices 12V DC Fresh Water Pressure Diaphragm Pump Self Priming Sprayer Pump with Pressure Switch 4 L/Min 1.0 GPM 80 PSI for RV Camper Marine Boat
How to Use Water Pump 1. Connect the water pump to the inlet and outlet pipes. You must ensure that the inlet/outlet pipe and the pump are tightly connected to prevent air from entering, otherwise, it will cause low pressure or water leakage; Tip: There is an arrow on the pump cover to indicate the direction of water in and out, and the direction of the arrow is water. 2. Install a filter at the water inlet. The density of the filter should be above 0.177 mm (that is, 1cm² has 80 small holes). 3. Connect the pump to the power supply. The power supply parameters must meet the input requirements of the motor. 4. Turn on the power and the pump starts to run.
12VOLTDC – Max Amp:3.0A – Max Pressure : 0.65Mpa – Oper Flow : 4.0l/min
Multi-Purpose: Home Use For Garden Sprinklers, Shower, Water Taps In The Boat, Caravan Or Motor
Long Life,Self Priming Made From Practical Material , Which Guarantees A Longer Lifespan
do not pump flammablefluids do not use pump in an explosive enviroment.
Use of advanced technology and optimum material make these products suitable for varied agricultural purposes.